In the hand panel industry, the common materials used to make transparent hand panels are PC and PMMA (acrylic). Usually, we encounter the problem that some customers have a habit of using PC transparent materials in future mass production, so they also choose PC transparent materials when they request to make hand panels. So what materials are good for making transparent hand boards? Are they made according to customers'requirements?

濟南手板廠家建議大家，這時候我們應該與客戶講清其利弊關系，PC料的質地比較硬，在后期的打磨和拋光過程中，如果想讓產品的透明如量產的貨一樣是很有難度的。在這里尖峰模型為大家作詳細講解。所以，在制作透明手板的時候，并不是選擇pc透明料而是選擇亞克力材質比較好，下面就跟大家詳細講解一下。

Jinan hand plate manufacturers suggest that we should clarify the pros and cons with customers at this time. The quality of PC materials is relatively hard. In the later polishing and polishing process, it is very difficult to make the products transparent as mass-produced goods. Here, the Peak Model is explained in detail. Therefore, when making transparent hand panels, it is better to choose acrylic material instead of PC transparent material. Here we will explain it in detail.

從打磨和拋光的角度來講，pc手板所花費的時間比較長，因為它的材質比較硬，有些狹小的地方人手根本無法用力去拋光，即便是方便拋光的地方，所花費的時間要比亞克力手板長。相反，使用材質較軟的亞克力材料做透明手板會方便很多。

From the point of view of polishing and polishing, PC hand plate takes a long time, because its material is relatively hard, some small places can not be hard to polish, even in convenient polishing places, the time spent is longer than acrylic hand plate. On the contrary, it is much easier to make transparent hand panels with softer acrylic materials.

從色澤方面來講，pc材料并不是完全的透明，如果仔細觀察pc材料做出的手板的話，就會發現它的表面泛著紫色，如果想讓它完全透明的話，需要在藥水中侵泡一段時間(這是一種化學反應);而亞克力材料是完全透明的，所以亞克力手板打磨出來就已經是透明的了，無須做任何的處理。有一句話形象的說明了pc手板和亞克力手板的區別，那就是“pc手板的透明是熏出來的，亞克力手板的透明是磨出來的”。

In terms of colour and lustre, the PC material is not completely transparent. If you carefully observe the panel made by PC material, you will find that its surface is purple. If you want it to be completely transparent, you need to soak in the solution for a period of time (this is a chemical reaction); and acrylic material is completely transparent, so acrylic material is completely transparent. The grinding of the power hand plate is transparent without any treatment. One sentence vividly illustrates the difference between PC and acrylic hand boards, that is, "the transparency of PC hand boards is fumigated, and the transparency of acrylic hand boards is ground".

以上就是小編給大家整理提供的精彩內容了，如果大家還有疑惑的地方，歡迎給我們留言評論，大家也可以到濟南手板的網站，咨詢客服人員：http://www.ebook5.cn

Above is the wonderful content that Xiaobian has provided to you. If you have any doubts, please leave us a comment. You can also go to the website of Jinan Handboard and consult the customer service personnel: http://www.ebook5.cn.